Previous drilling for reaming
PREVIOUS DRILLING FOR REAMING - TALADRADO PREVIO PARA ESCARIADO | |||||
Material | Ø up to 6 mm Ø hasta 6 mm |
Ø up to 10 mm Ø hasta 10 mm |
Ø up to 16 mm Ø hasta 16 mm |
Ø up to 25 mm Ø hasta 25 mm |
Ø over 25 mm Ø desde 25 mm |
Steels up to 700 N/mm2 Aceros hasta 700 N/mm2 |
0,1 - 0,2 | 0.2 | 0,2 - 0,3 | 0,3 - 0,4 | 0.4 |
Steels 700 - 1000 N/mm2 Aceros 700 - 1000 N/mm2 |
0,1 - 0,2 | 0.2 | 0.2 | 0.3 | 0,3 - 0,4 |
Cast steel Acero fundido |
0,1 - 0,2 | 0.2 | 0.2 | 0,2 - 0,3 | 0,3 - 0,4 |
Cast iron GG Fundición GG |
0,1 - 0,2 | 0.2 | 0,2 - 0,3 | 0,3 - 0,4 | 0,3 - 0,4 |
Cast iron GGG Fundición GGG |
0,1 - 0,2 | 0.2 | 0.3 | 0,3 - 0,4 | 0.4 |
Copper Cobre |
0,1 - 0,2 | 0,2 - 0,3 | 0,3 - 0,4 | 0.4 | 0,4 - 0,5 |
Brass - Bronze Latón - Bronce |
0,1 - 0,2 | 0.2 | 0,2 - 0,3 | 0.3 | 0,3 - 0,4 |
Light alloys Aleaciones ligeras |
0,1 - 0,2 | 0,2 - 0,3 | 0,3 - 0,4 | 0.4 | 0,4 - 0,5 |
Plastics, hard Duroplásticos |
0,1 - 0,2 | 0.2 | 0.4 | 0,4 - 0,5 | 0.5 |
Plastics, soft Termoplásticos |
0,1 - 0,2 | 0.2 | 0.2 | 0.3 | 0,3 - 0,4 |
Stock allowance (recommended values in mm) · Masa a escariar (valores recomendados en mm) Due to the efficient action of the spiral, the values for quick spiral reamers may be increased by 50 to 100%. Los valores para los escariadores de gran rendimiento pueden aumentarse de un 50 a un 100%. |